Wheel sizes

Just a general question what rim sizes do people have on there micra ? And what would the biggest size you would go be for the steering got to hard or hit the guards
Just looking at some rims but just want other opinions :)

Thanks for your help

195/40/16 on corsa coilovers.

(its not my car)

I have had 13s, 14s, 15s, and even 16s. 16s are brake cookers. 15s or smaller are good. be careful with coilovers with 15s i had to relocate my rear bumper mounts as it would shred tyres, other wise i could not full lock the steering. I was super super low tho.

What about 15x7 ?? Would they be too wide ? And would I have to modify it much to make them fit ??

Looking at some rims and that's the size of them

Thanks :)

Do you know the off set of the wheels? Just guessing you would want them around +30. More negative could be a problem.

15x7 et25 with 175/50/15 is no problem at all:




Mine with Ultralite G-spec 15x6.5 et35 on 195/45/15:

So what if it's in the neg say like -30 would have a problem ? Or

If your talking about 15x7 -30 offset then no they won't fit under stock guards even if you roll them. Look at the post above you can see 15x7 +25 sit just about flush with the guards, -30 offset means you will be a further 55mm out from the guard. Try willtheyfit.com and go from there.

15 by 7.5 plus thirty with 185/55's they fit with a lip roll just cann't go to low or they scrub on big bumps but other wise they fit.