Technical Forums» Technical / Performance» throttle body
|
justin » CMF Member victor harbor Australia Member since:  Posts:  |
throttle body |
Fri 07 Jun 2013 04:38:58 PM |
|
Whats the easiest way to work out what throttle body my micra has on it....not sure if its running the stock one or a ga15/ga16 body instead...just wanna know as i want to do the upgrade but have no idea if a previous owner has already done it....cheers justin
|
||
|
|
||
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 04:58:37 PM |
|
the CG is 45mm dia justin, GA16 has a bolt on maf and different idle control valves :)
|
||
|
justin » CMF Member victor harbor Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 05:03:45 PM |
|
frank is that diameter on top where air box sits ?
|
||
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 05:24:23 PM |
|
they,re all the same mate, 70mm ? (and SR20,s)
|
||
|
Tinky » CMF Member Currumbin Waters Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 06:15:03 PM |
|
Outlet of throttle body Justin gasket between T/B and manifold. GA15 has outlet of 50mm. Looks the same all in one. If you look down the throat with a torch you might be able to guestimate ... but you'd need a graduated eyeball :)
|
||
|
Danvillan » CMF Member Mulgoa Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 08:08:13 PM |
|
Picture show the couple of types of TB. CG13 has the cover which is regularly remove to perform the re-solder fix. The GA15 has the ICV as circled.
Should be easy to figure out without removing any parts... just compare to the photos. |
||
|
Danvillan » CMF Member Mulgoa Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 08:08:40 PM |
|
Another angle
|
||
|
Rudy » CMF Member Hunter Valley mob 0400767960 Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 08:59:17 PM |
|
the ga15 t/b I got looks more like the cg13 t/b in your pic Dan, there almost identical beside the outlet bore size
|
||
|
justin » CMF Member victor harbor Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 09:28:06 PM |
|
Mine looks like its got the stock one but its been siliconed on the cover where you re solder it. Thinking its just a re soldered standard one
|
||
|
Danvillan » CMF Member Mulgoa Australia Member since: Posts: |
Re: throttle body |
Fri 07 Jun 2013 10:44:59 PM |
|
Rudy, does that have a straight plug in ICV, do you know what car your TB is off? Just curious.
|
||
|
Rudy » CMF Member Hunter Valley mob 0400767960 Australia Member since: Posts: |
Re: throttle body |
Sat 08 Jun 2013 05:02:39 PM |
|
Danvillan WROTE: "Rudy, does that have a straight plug in ICV, do you know what car your TB is off? Just curious." same ICV setup as cg13, almost identical until you turn it upside down, not sure what car its from, probably jap spec pulsar? |
||