Technical Forums» Technical / Performance» Stalling at the Lights
|
zzbullan » CMF Member Brisbane Australia Member since:  Posts:  |
Stalling at the Lights |
Wed 17 Oct 2012 11:36:35 AM |
|
Hey my Micra stalls sometimes whilst at the lights, I also feel a lose of power (not complete lose, but you can definitely feel it lose some power) whilst driving sometimes.
can anyone advise what the problem is? What do I need to do to fix it? |
||
|
|
||
|
k11-king » CMF Member Australia Member since: Posts: |
Re: Stalling at the Lights |
Wed 17 Oct 2012 12:32:35 PM |
|
you may have a throttle body problem (commonly found in the k11 micra)
lucky for you it is a reasonably easy fix and only needs some soldering the link below is a guide provided from another member http://www.micra.com.au/technical-articles/cg13de-throttle-body-resoldering-guide.php my micra was doing this until i re-soldered it and now it drives perfectly. GL and hope this helps |
||
|
Doom » CMF Member Adelaide Australia Member since: Posts: |
Re: Stalling at the Lights |
Wed 17 Oct 2012 01:02:05 PM |
|
Is it only when the AC is on?
This could be the idle up valve, which is also on the throttle body. Pull it apart and clean it |
||
|
zzbullan » CMF Member Brisbane Australia Member since: Posts: |
Re: Stalling at the Lights |
Thu 18 Oct 2012 12:44:23 PM |
|
Hey Guys,
I will give it a try tomorrow, and I hope it performs better; cause I hate paying for new parts (because they are so expensive) and don't even get me started on the cost of sending it to the mechanics. Will let you know the results. |
||
|
zzbullan » CMF Member Brisbane Australia Member since: Posts: |
Re: Stalling at the Lights |
Fri 19 Oct 2012 10:40:41 PM |
|
k11-king WROTE: "you may have a throttle body problem (commonly found in the k11 micra) lucky for you it is a reasonably easy fix and only needs some soldering the link below is a guide provided from another member http://www.micra.com.au/technical-articles/cg13de-throttle-body-resoldering-guide.php my micra was doing this until i re-soldered it and now it drives perfectly. GL and hope this helps " Just did this today, and I was suprised at how something so simple could solve my problems...runs great now, will have to see if anything happens in the next few weeks. Thanks for the help. |
||
|
MicraGirl2011 » CMF Member Gold Coast Australia Member since: Posts: |
Re: Stalling at the Lights |
Fri 19 Oct 2012 10:43:13 PM |
|
if you do still have trouble i have a cheap throttle body brand new only used for 3 days :)
|
||