Technical Forums» Technical / Performance» Advice please...rear camber
|
D6045 » CMF Member Minglanila Philippines Member since:  Posts:  |
Advice please...rear camber |
Thu 28 Jun 2012 04:54:49 PM |
|
Any step guides on how to give the rear some camber? DIY or any welding suggestions..steps with pictures will help alot..thanks...slammed on 15X7 here! post pics later...thanks..
|
||
|
|
||
|
RTK » CMF Member Australia Member since: Posts: |
Re: Advice please...rear camber |
Thu 28 Jun 2012 05:43:55 PM |
|
Frank!
|
||
|
RTK » CMF Member Australia Member since: Posts: |
Re: Advice please...rear camber |
Thu 28 Jun 2012 05:44:18 PM |
|
You should be able to fit 15x7 nicely
|
||
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: Advice please...rear camber |
Thu 28 Jun 2012 06:13:43 PM |
|
some pic,s of mine here :)
http://www.micra.org.uk/threads/jessyps-super-s.45936/page-2#post-487811 |
||
|
Juzzy » CMF Member Newcastle Australia Member since: Posts: |
Re: Advice please...rear camber |
Thu 28 Jun 2012 07:23:49 PM |
|
I run 15x7 and all i needed was to roll the guards, +15 offset
|
||
|
antos » CMF Member brisvegas Australia Member since: Posts: |
Re: Advice please...rear camber |
Thu 28 Jun 2012 07:44:04 PM |
|
Frank, what roof rack set up is that? Love the look of your beast it looks tuff as
|
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Tue 03 Jul 2012 03:26:39 PM |
|
Juzzy WROTE: "I run 15x7 and all i needed was to roll the guards, +15 offset " im on 15x7 +35..and shaved part the guards off...and still rubbing...im waiting for my rs...new wheels will be 15x7 +25 and 15x8+15..thats why i need bad ass camber for the back...haha... frank2 WROTE: "some pic,s of mine here :) http://www.micra.org.uk/threads/jessyps-super-s.45936/page-2#post-487811" frank..i would love to do your technique but if you could provide me with a step by step procedure and provide with pictures..that would be awesome! if welding it your way affect its sturdiness? will it snap off if someone rides at the back..haha..thanks mate |
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Tue 03 Jul 2012 03:31:26 PM |
 this is how it looked before...repainted it..dropped it even more..thats why im in desperate need of help to help my rear... |
||
|
Juzzy » CMF Member Newcastle Australia Member since: Posts: |
Re: Advice please...rear camber |
Tue 03 Jul 2012 03:47:12 PM |
|
Maybe a smaller width tyre and stretch them a bit would help a bit
|
||
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: Advice please...rear camber |
Tue 03 Jul 2012 04:47:11 PM |
|
D6045 WROTE: frank..i would love to do your technique but if you could provide me with a step by step procedure and provide with pictures..that would be awesome! if welding it your way affect its sturdiness? will it snap off if someone rides at the back..haha..thanks mate " those pic,s on jessy,s thread are all i have mate, but they should be self explanatory, and yes they will break off if not welded properly :) |
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Sun 02 Dec 2012 10:17:30 PM |
|
since i got no available aftermarket mods available for my k11...will cutting my pan hard rod shorter pull the wheels in giving it a little negative camber on the rear? Going to buy 15x8 +15et for chrismtas.. TIA
|
||
|
RTK » CMF Member Australia Member since: Posts: |
Re: Advice please...rear camber |
Sun 02 Dec 2012 10:31:23 PM |
|
Need to cut and weld just behind the brakes, modding the panhard rod won't do nothing
|
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Sun 02 Dec 2012 10:46:07 PM |
|
RTK WROTE: "Need to cut and weld just behind the brakes, modding the panhard rod won't do nothing" just the top part? i wish someone had a detailed explanation..don't want to snap some parts |
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Sun 02 Dec 2012 10:47:05 PM |
|
This is my current setup
|
||
Image Attached:
|
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Sun 02 Dec 2012 10:49:23 PM |
|
current setup is 15x7 +35 and i want to fit in these below 15x8 +15
|
||
Image Attached:
|
||
|
RTK » CMF Member Australia Member since: Posts: |
Re: Advice please...rear camber |
Sun 02 Dec 2012 10:51:08 PM |
|
I know frank has done it before had like -2 maybe -3 camber on the rear, once I get 13x8 ill be running camber too haha, might put up a thread for those who want it see how it's done
|
||
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: Advice please...rear camber |
Mon 03 Dec 2012 07:55:16 AM |
|
RTK WROTE: "I know frank has done it before had like -2 maybe -3 camber on the rear, once I get 13x8 ill be running camber too haha, might put up a thread for those who want it see how it's done" there are some pics in that link i posted eh, and here,s the result :) |
||
Image Attached:
|
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Mon 03 Dec 2012 06:51:38 PM |
|
frank2 WROTE: " RTK WROTE: "I know frank has done it before had like -2 maybe -3 camber on the rear, once I get 13x8 ill be running camber too haha, might put up a thread for those who want it see how it's done" there are some pics in that link i posted eh, and here,s the result :)" are both sides accurate in its camber on the rear? i wanted a detailed explanation on how this guy achieved this...detail2 procedure would be decent, don't want to end up buying a whole new back portion |
||
Image Attached:
|
||
|
RTK » CMF Member Australia Member since: Posts: |
Re: Advice please...rear camber |
Mon 03 Dec 2012 07:00:05 PM |
|
The micra above has had more then just camber work, it has a prefect -6.75 degrees plus has had the guards cut and reshaped
|
||
|
D6045 » CMF Member Minglanila Philippines Member since: Posts: |
Re: Advice please...rear camber |
Mon 03 Dec 2012 07:44:27 PM |
|
RTK WROTE: "The micra above has had more then just camber work, it has a prefect -6.75 degrees plus has had the guards cut and reshaped" same way as franks method for his camber? i cut off and smoothened out my guards and pulled the fender out a bit before i had a repaint so just the camber needs work |
||
|
RTK » CMF Member Australia Member since: Posts: |
Re: Advice please...rear camber |
Mon 03 Dec 2012 08:05:51 PM |
|
I believe do about -3/-4 and trial fit, don't do guard work unless you need
|
||