Technical Forums» Classifieds» WTB: Uprated Fuel Setup
|
mycra » CMF Member melbourne Australia Member since:  Posts:  |
WTB: Uprated Fuel Setup |
Fri 26 Aug 2011 04:05:28 PM |
|
hello boys..
it time to retire the stock setup(new genuine pump and reco injectors if any1 wants them). I am after anything that will support around 180hp+(Injectors/Rail/Pump). don't really care what setup/type as long as they are A1 goes straight on, minimum stuffing around.... i will be keeping N/A also any tips please feel free to comment. cheers |
||
|
|
||
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Fri 26 Aug 2011 04:11:12 PM |
|
CGA topfeed rail FTW mycra, but you need an SR t/b to clear it ideally
|
||
|
mycra » CMF Member melbourne Australia Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Fri 26 Aug 2011 04:30:50 PM |
|
by the way current motor is 258 deg cams+adj gears, flowed head, double valve springs, titanium retainers, cg10 pistons, sr20(70mmt/b, flowed inlet mani, tuned on modified nismo ecu with nistune t4 dual board. only fuel mod is regulator.
sps is making me a set of raised hi comp pistons to bring up comp ratio. i notice every time i start, need to wait 15sec+ for pump to pickup pressure or wont start.... |
||
|
mycra » CMF Member melbourne Australia Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Sat 27 Aug 2011 11:19:19 PM |
|
Yeah pm me low...
|
||
|
asdame » CMF Member United Kingdom Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Tue 30 Aug 2011 02:36:10 AM |
|
i've just fitted a walbro 255 pump on my 160bhp micra turbo cos the 2nd hand skyline GTS-T pump was making it lean out at the high end. its fixed the overall mixture issue now.
see on my blog here at post #1766 http://www.micra.org.uk/threads/35251-PollyMobiles-Rebuild/page36 pump was for a facelift mount & connector plug and twas smaller than my prefacelift pump so had to do a slight mod of the rubber mounting. |
||
Image Attached:
|
||
|
gumbi » CMF Member Australia Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Mon 05 Sep 2011 07:57:24 PM |
|
pretty sure ndxxx will have some 375cc ones in rail to fit because i just braught most of his turbo kit... if thats any help
|
||
|
mycra » CMF Member melbourne Australia Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Tue 06 Sep 2011 12:12:14 PM |
|
asdame WROTE: "i've just fitted a walbro 255 pump on my 160bhp micra turbo cos the 2nd hand skyline GTS-T pump was making it lean out at the high end. its fixed the overall mixture issue now. see on my blog here at post #1766 http://www.micra.org.uk/threads/35251-PollyMobiles-Rebuild/page36 pump was for a facelift mount & connector plug and twas smaller than my prefacelift pump so had to do a slight mod of the rubber mounting." cheers mate, been great help reading ur build tread. Got them injectors sorted now. i might source out a new gts-t pump. mine is n/a though should be enough hey..? |
||
|
gumbi » CMF Member Australia Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Tue 06 Sep 2011 02:22:15 PM |
|
LowMicra WROTE: " gumbi WROTE: "pretty sure ndxxx will have some 375cc ones in rail to fit because i just braught most of his turbo kit... if thats any help" are you going to run standards then??" is that a joke...? i have a cga fuel rail so i need to find some injectors to suit |
||
|
gumbi » CMF Member Australia Member since: Posts: |
Re: WTB: Uprated Fuel Setup |
Wed 07 Sep 2011 08:19:11 AM |
|
i have a cga top feed rail so i didn't buy the injectors...
|
||