Technical Forums» Classifieds» Wanted Upgraded brakes....
sikK11 » CMF Member Darwin Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Wanted Upgraded brakes.... |
Mon 04 Jan 2010 08:56:44 AM |
Hey guys its time i replace the pads in the Micra and i though hmmm well no point doing what i did last time even though i had no problems with them fading and stuff. Its just everyone else has got the pulsar brakes so thought i would do it as well.
Seeing what is out there in the way of brake calipers and possible rotors. If anyone has a spare set or some they were going to use but now dont have time or if they need a rebuild kit through them. I has some moneyz i am willing to shell out for them. |
||
|
33driver » CMF Member Brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Mon 04 Jan 2010 09:32:42 AM |
I recently did mine, hit up a wrecker for the calipers, I paid $40 for the pair, bought RDA Slotted Rotors for around $100 a pair, EBX Kevlar's for about $60 a pair. Rebuild kits of NSM were cheap as, from memory around $30 each.
All up $260ish for a set of upgraded brakes is pretty damn good! |
sikK11 » CMF Member Darwin Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Tue 05 Jan 2010 01:37:25 AM |
yeah figured as much. Just seeing if anyone had anything before looking elsewhere.
|
fred » CMF Member Murwillumbah Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Tue 05 Jan 2010 07:22:13 AM |
its gunna cost $120 bucks for new rotors...so might as well, bite the bullet and get pulsar stuff, it will last heaps (mine have been on unchanged for nearly 4 years and still clean and very little wear, I was changing discs every year with micra ones)
|
sikK11 » CMF Member Darwin Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Tue 05 Jan 2010 07:36:25 PM |
Yeah i know fred that is what i am doing. Hence me asking for pulsar brakes for sale.... I am seeing what is out there before i go elsewhere. But never mind i found a set off a n15 SSS pulsar
|
33driver » CMF Member Brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Tue 05 Jan 2010 07:47:35 PM |
nice, won't regret it, if I had better tyres on the micra I reckon I would outstop the my skyline :P
|
fred » CMF Member Murwillumbah Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Tue 05 Jan 2010 09:34:23 PM |
noyce... u wont believe the difference, and wonder why u didn't do it b4!
|
sikK11 » CMF Member Darwin Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Wed 06 Jan 2010 09:58:00 AM |
I went slotted rotors and race pads with fluid before i knew the brakes were interchangable and they have stood up well. I outstop my old skyline with ease not to mention most of the race cars on the track.
|
fred » CMF Member Murwillumbah Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Wanted Upgraded brakes.... |
Wed 06 Jan 2010 11:43:33 AM |
there u go! good one.
|