Technical Forums» Technical / Performance» WTB: Nissan Cube Manifold
micratech » CMF Member Geithus Norway Member since: Posts: |
WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 07:43:36 AM |
Anyone able to get hold of one of these original manifolds, new or used?
If so what price? |
||
|
33driver » CMF Member Brisbane Australia Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:18:32 PM |
haven't seen many cube's in oz, have you tried yahoo auctions? More of a jap thing i think, are there many in Norway?
|
mik » CMF Member Stuttgart Germany Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:22:11 PM |
They'll release the Cube in the End of 2009 in Germany. Why do you need the manifold? Or do you mean the HKS Cube Turbo manifold?
Cheers mik |
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:31:47 PM |
33driver WROTE: "haven't seen many cube's in oz, have you tried yahoo auctions? More of a jap thing i think, are there many in Norway?" Just have a small hope that someone in the micra.com.au community know a way to get hold of one. Cubes are far away from Norway I`m afraid, so thats the reason for posting here. Maybe if someone has a contact in Japan or something? The Nissan Cube Manifold fits the CG13DE engine fine, and thats the thaught. To put a Nissan Cube Manifold in one of my current Micra projects.. mik WROTE: "They'll release the Cube in the End of 2009 in Germany. Why do you need the manifold? Or do you mean the HKS Cube Turbo manifold? Cheers mik" I need the manifold for one of my current Micra projects Mik. HKS Cube Turbo Manifold is also intresting, but is it possible to get hold of just the manifold? |
33driver » CMF Member Brisbane Australia Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:36:07 PM |
mate i have a few contacts, but it may cost an arm and leg to get stuff moving, i'm not sure if they ship to norway, but in oz there are 2 companies i use to get jap gear:
http://www.perfectrun.com.au http://www.nengun.com Perfect Run is my pick, quick to reply and can find just about anything. I do have some old contact in Japan but I doubt they would be able to get anything cheaper or as quick as PerfectRun or Nengun. |
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:50:14 PM |
Just to be clear, this is what im after. So hopefully someone can post some direct info about how to get hold of one..?
|
||
Image Attached: |
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:51:28 PM |
Clear view of the manifold..
|
||
Image Attached: |
crumpets » CMF Member Australia Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 06:58:50 PM |
That doesnt look factory yo
|
sikK11 » CMF Member Darwin Australia Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 07:01:05 PM |
no definately not
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 07:23:25 PM |
It is from the z10 cube alpha spec with the 101hp CGA3DE engine..
|
33driver » CMF Member Brisbane Australia Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Tue 01 Sep 2009 10:10:18 PM |
thats worth me getting in contact with my jap buddies...lol
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 01:11:19 AM |
For shure, a front cut from the z10 cube alpha spec with the CGA3DE engine would give a 101hp factory output.. ;)
So if anyone got more info on where to get this part please share..?? |
mik » CMF Member Stuttgart Germany Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 06:57:28 AM |
How about a full CGA3DE engine conversion? Is that possible? never heard of that, or has anyone done it yet? It should be an easy swap i guess.
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 07:13:36 AM |
i bought one today mik (£60) i,ll let you know :)
|
||
Image Attached: |
mik » CMF Member Stuttgart Germany Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 07:15:15 AM |
noooooo way, haha allright, i want one too, where did you get it? :D is it the 101ps spec?
if yes, can you really sort another one out? is the ECU also included? i'll drive to UK if i have to :D |
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 08:00:37 AM |
Say woooooot..thats just under 600 norwegian kroner. Thats cheaper than a pair of desent skate shoes up here!! :O
Front cut from a 101ps alpha spec cube would be ideal for a straight swap Mik. But I guess it can be done in another way to with a little effort. Donno about how to wire the factory knocksensor to the CG13DE ECU though.. |
ronin_kid » CMF Member United Kingdom Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 08:22:55 AM |
Mic / micratech - i'm pretty sure what Frank has got there is a CGA3 from a coilpack K11 rather then a Cube, the cube is still pretty rare here in the UK....
|
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 08:37:34 AM |
99% shure about that too. And i bet Mik is 99% shure about that aswell, because of the question "is it the 101ps spec?"..
|
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 08:45:04 AM |
micratech WROTE: "99% shure about that too. And i bet Mik is 99% shure about that aswell, because of the question "is it the 101ps spec?".." i,m hoping for 110hp :) with my best 2 cams (270 deg inl + 245 deg ex) 11.5:1 c/r (my weldfilled head) 1.6 t/b, exh mods yadda yadda frank |
frank2 » CMF Member birmingham United Kingdom Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 08:48:33 AM |
anyway back on topic lol, here,s a pic of the underside of a cube mani
small primaries aint they ? |
||
Image Attached: |
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Wed 02 Sep 2009 10:01:44 AM |
Thats exacty the one I am after from the 101hp alpha spec cube.
Anyone?? |
Pyro » CMF Member Netherlands Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Sat 05 Sep 2009 06:04:01 AM |
I have searched a long time for this one but gave up. Found a couple of regular ones, but never the aplha spec. I might start the hunt again. Nice one Frank
|
nz_aj » CMF Member Auckland New Zealand Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Sun 06 Sep 2009 10:39:36 AM |
We have plenty of Cubes imported from Japan, alpha spec is rare thou
|
Mickb » CMF Member Perth Australia Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Sat 19 Sep 2009 07:12:51 PM |
hey, is this what you are looking for?
http://page11.auctions.yahoo.co.jp/jp/auction/n74698723 big $$$ for what it is, not sure what the alpha/not alpha specs are to be able to tell the difference. edit - does look a bit home tune, but so does the one above |
micratech » CMF Member Geithus Norway Member since: Posts: |
Re: WTB: Nissan Cube Manifold |
Sun 20 Sep 2009 01:50:39 AM |
Yup, thats the one!
|