Technical Forums» Classifieds» FS: Low-boost fuel setup (Haltech F5, Rail, etc.)
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sat 06 Dec 2008 04:25:44 PM |
Ok so, what we have here is:
-Haltech F5 Fuel-Only ECU + Wiring loom -CG13 Throttlebody with extra Camry SV21 injector -CG13 Fuel Rail + Standard injectors I believe it originated with Family Hack/White Knight and is likely identical to the setup that Mipcar's had running nicely in his car for years. I have no use for this setup as I've gone down a different route. For those that aren't familiar with what a 5th Injector setup, it's a way to increase fuel for when needed like if running a Turbo setup - when a certain boost level is detected by the Haltech ECU (~3-4psi I believe), the 5th injector drilled into the Throttlebody kicks in and supplies the extra fuel needed to keep mixtures correct when boosting :) It's an inexpensive way to go boosted that's for sure. Images: ![]() ![]() ![]() ![]() ![]() ![]() ![]() Postage: Pickup preferred but will post at buyer's expense. $300 ONO ---dens |
||
|
mipcar » CMF Member Upper Beaconsfield Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sat 06 Dec 2008 06:00:00 PM |
I go with Dens appraisal of this. Very easy/simple setup.
Only niggle I have is a little roughness when hovering around the 3,000 rpm mark. It might be the point where the 5th injector begins cutting in/out.. Above/below that it's fine. Mychael |
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sun 07 Dec 2008 12:02:21 AM |
and red = fastness
|
POSSUM » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sun 07 Dec 2008 06:32:29 PM |
first dibs on this do you have a contact number mine is 0404186195 thanks
|
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sun 07 Dec 2008 08:32:44 PM |
Hey tried calling you but rang out. Forgot to include my number in the first post - it's *removed*.
It'll go to the person that puts a deposit down first, so let me know ;) ---dens |
POSSUM » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sun 07 Dec 2008 08:48:37 PM |
sold to me!:)
|
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: FS: Low-boost fuel setup (Haltech F5, Rail, etc.) |
Sun 07 Dec 2008 08:59:55 PM |
POSSUM WROTE: "sold to me!:)" Correction - sold pending payment. ;) Have sent you my details mate. Edit: This is now sold, thank you for your attention. Didn't post a new message as I didn't want to bump the thread. ---dens |