Technical Forums» Classifieds» project micra for sale in sydney
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
project micra for sale in sydney |
Sat 12 Apr 2008 09:00:21 PM |
paid for my motorcycle, so project micra is up for sale
motor and gearbox as obtained from sportsclassic.com.au good compression - $400 1 spare motor 250 thou + kms - awaiting pick up 1 rubbish motor, has water, could port head - gone spare bonnet on hold spare hatch $80 *s14/15 apexi world sport dampers, height adjustable only - need rebuild, could probably revalve and modify the fronts to suit the micra - $150 *megasquirt pack and cbr600rr tbs now on $old *red rocker cover painted red - $old *stock front calipers with ebc green stuff pads and dba slotted rotors - $old *ebay micra short shift - $old *monsta performance monster tacho - $old *95 lx 2 door, rubbed back, imperfections filled and primered - comes with a wrecked slx, 2 doors & hatch. no motor $old *2 inch cat back with axle back & cat with no muffler $old *standard airbox with massive modifed inlet, i think i made it 3 inch with a K&N filter - $old *hurricane extractors to fit NON AC micra- $old *omp strut brace for the micra - $old - *mismatched 14x6 mags work meshies and racing hart spokies, 7 rims in total - $old try and get pics up soon sorry for some reason im not receiving any PMs by email, you can reach me at crzie at hotmail dot com |
||
|
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 13 Apr 2008 10:17:06 PM |
where was this thread a month ago :D
pic of strut brace & exhaust? |
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 13 Apr 2008 10:33:10 PM |
pic of seats
|
sikK11 » CMF Member Darwin Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 15 Apr 2008 07:34:16 AM |
pics of seats and the extractors.
|
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 15 Apr 2008 02:19:48 PM |
Sent you a PM the other day but haven't yet heard a response :)
---dens |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 15 Apr 2008 07:43:24 PM |
found some old pics, works been real busy so replies might be abit slow, will try and get pics of seats and strut brace soon
didnt get your PM though dens, i've checked my details and its still correct on here. |
littlebear » CMF Member Adelaide Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 15 Apr 2008 08:03:59 PM |
Hey if you have any spare dash knobs switches bit n pieces I'd be interested
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 15 Apr 2008 10:54:23 PM |
sorry bear, looking to get rid of all that with the car
|
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 15 Apr 2008 11:26:48 PM |
Sent you another PM - lemme know if that one still doesn't make it :)
---dens |
smallrat » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 16 Apr 2008 01:40:31 AM |
Hi mate!i've sent you a pm when you posted the ad.Still no response.Really interested in on the extractors and the strut brace.Could you please let me know.Thanks.
|
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 16 Apr 2008 09:52:39 AM |
how olds the exhaust? ie how long was it on the car?
don't need the extractors, just cat back |
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 16 Apr 2008 12:30:09 PM |
Well in that case - if the two above people take those bits, I did ask by pm (which like smallrat, didn't seem to get through) could I please have the little bit in the middle that connects the extractors to the catback? I've got a 2" system and extractors... but just missing that one vital piece that I'd need to get made up otherwise.
That, and I wanted to discuss with you about the TB's. ---dens |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 16 Apr 2008 04:42:31 PM |
dens - yeah not sure whats going on with my emails, but you can email me at crzie at hotmail dt com, didnt get ur last pm
we'll talk there the exhaust is 2nd hand, has not been fitted to the car, so cant tell you the age |
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 16 Apr 2008 05:52:38 PM |
Hey Smidge, you looking at using a muffler for your car or you looking to fit the no-muffler back? :P I'm happy to take that rear part if you don't want it, haha.
Emailed you mate :) ---dens |
sportsclassic » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Thu 17 Apr 2008 01:22:17 PM |
Jason dont sell your micra!
|
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Thu 17 Apr 2008 02:57:21 PM |
cool i'll pass on the exhaust, all yours dens!
|
deNs » CMF Member Melbourne Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Thu 17 Apr 2008 03:05:13 PM |
You're not after the cat-back at all? I'm only after the bit between the cat-back and the extractors and possibly the rear part if you were going to use a muffler instead of that..
---dens |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Thu 17 Apr 2008 05:48:14 PM |
smidge the cat back with the hi flow cat is still available, dens only wants the flexi pipe in front of the cat
no longer interested in cars now carlos..! back in to bikes, as my friends are all getting back on em. better commute to work for me too |
smallrat » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 01:38:45 AM |
Sent you pm.
|
funky2nite » CMF Member Marsascala Malta Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 07:40:40 AM |
i'll take the strut brace if you'rewilling to send it internationally mate. I'm from Malta. E-mail : funky2nite2003@yahoo.com
Msn: sofunky_187@hotmail.com cheers, Ian |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 08:41:54 AM |
what bike did ya buy?
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 09:48:31 AM |
hi funky2nite, already have local interest for the strut brace, i'll try and sell it locally first if that fails, sending it to malta wouldnt be a problem
smidge, i bought a 91 honda nsr250, i'll post pics once i get it but i've attached one from the advertisement its the top spec, adjustable forks, rear shock, motor in it now does not have a dry clutch, but the spare stuffed motor does. dry clutches sound wicked and its quite quick for a 250 on the road and track im small so it'll have no problem hauling my arse, my last bike only weighed 110kgs, if i ever feel the neede to increase power theres a 300cc kit which i can upgrade to, 3rd gear mono's on a 250 anyone? |
||
Image Attached:![]() |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 10:24:54 AM |
thats awesome mate! i've got a VTR but its pretty tame... good to commute on tho
can't wait to get into a 600 or something thats quicker than cars i've owned... |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 10:56:34 AM |
yeah i was looking at one of those, but im looking to go to a few track days so the NSR was the wiser choice.
plus 2 strokes are fun with the power band, i think the k8 gixxer 600 are the fastest out of the supersport now i dont think i'll ever be able to ride a 600, my legs are too short |
smallrat » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Apr 2008 11:57:01 PM |
pm sent
|
Daz » CMF Member Atherton Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sat 26 Apr 2008 09:27:28 AM |
Hi, what sections of the exhust system are still available?
My Micra currently has the standard exhaust and I would like to replace it with a complete system. |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 27 Apr 2008 07:20:00 PM |
hey daz,
the cat with exhaust back and axle back minus the muffler is still available. |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 30 Apr 2008 04:27:21 PM |
taking offers on the car
|
Daz » CMF Member Atherton Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Thu 01 May 2008 09:40:08 PM |
Thanks but I am after a complete system, extractors through to rear muffler. Any suggestions?
Regards Darren |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sat 03 May 2008 05:17:29 PM |
have you got any pics of the shell at all?
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 05 May 2008 01:20:18 PM |
will try and get pics before the weeks out
|
Mickb » CMF Member Perth Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 05 May 2008 05:31:37 PM |
yep looking for pics of the shell as well
cheers |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 07 May 2008 05:13:44 PM |
pictures removed
|
Mickb » CMF Member Perth Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 07 May 2008 06:38:21 PM |
Does the shell have an engine in it? or is that one of the pieces to be put back in the puzzle?
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 07 May 2008 06:40:08 PM |
is that 2"s old shell
|
Mickb » CMF Member Perth Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 07 May 2008 06:44:38 PM |
2?
|
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 07 May 2008 06:45:46 PM |
yeh.. 2... guy who had sodaniels car
|
Mickb » CMF Member Perth Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 07 May 2008 06:47:06 PM |
rightio
|
Daz » CMF Member Atherton Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 09 May 2008 05:53:43 AM |
lam.666 WROTE: "hey daz, the cat with exhaust back and axle back minus the muffler is still available. " Morning, Looks like 'Campbell' has some extractors avaiable and so now I'm wonder if you still have the rest of the system available? (Although re reading this page, (and your photos) there also appears to be a section between the extractors and the main pipe back. Am I correct that I will still have to source this other piece? What is the condition of the pipe and muffler/ cat of the pipe you have please (assuming you still have it) and would it be compatable with these other hurricane extractors? Also can you provide rough dimensions to enable a shipping cost (Nth Queensland). And finally, is a 2" system with the muffler etc you have going to be legal? (I recognise I will still need to get a rear muffler) |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 01 Jun 2008 01:28:25 AM |
daz, still waiting for news from the person that is interested in the exhaust
car is still available |
tris » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 01 Jun 2008 09:33:34 AM |
hey lam.. sorry its been taking so long... something fucked up in the mail... i never recieved the muffler. and turbo didnt get it sent back either.. hoping it will turn up somewhere.
anyway ill probably just take your exhaust anyway cos ill need it eventually... and im not sure if i can get one made up for that price with cat and all... im on holidays after next week so i can come have a look then. tris |
Daz » CMF Member Atherton Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 01 Jun 2008 05:55:49 PM |
Im still looking/ interested, I bought a set of headers (hurricane) but haven't gone ahead with the rest of the system.
Regards Darren |
ed. » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 02 Jun 2008 11:19:17 PM |
Got passenger side window from a LX? :P
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 03 Jun 2008 09:24:34 PM |
got a LX passenger window, comes with the car, spares and paint tho =)
items avaialble again: throttle bodies megasquirt + megaview short shift rocker cover |
sportsclassic » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 03 Jun 2008 09:46:07 PM |
hey jason, got any pictures of the megasquirt system and the throttle bodies?
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 08 Jun 2008 04:44:55 PM |
i'll need to unpack it, which i havent got round to doing yet but once i do, pics will be posted
prices updated |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 09 Jun 2008 09:43:53 PM |
hey mate, what colour is the bonnet and hatch?
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 10 Jun 2008 05:02:00 PM |
both blue in colour, if you get both i'll make it cheaper
wat colour were you after anyways? |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 10 Jun 2008 08:29:26 PM |
the blue my car is, you've seen it in pics yeah?
the lighter 95 model blue colour, if its that i'll take them 100% |
jaxx » CMF Member United Kingdom Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 10 Jun 2008 10:02:09 PM |
hi mate, the 600 TB's. do they come with the fuel rail and injectors? and does it come with the adapter to attach directley to the cg13de head? cheers
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 11 Jun 2008 12:54:43 PM |
http://micra.com.au/community/message.php?messageid=37012
it looks very similiar to the pics in here smidge, i'll try and get pics for you jaxx the tbs come with fuel rail and injectors, there is a chopped up manifold in the picture which needs to be straight cut and tubes welded on, then rubber/silicone hose to join them up. this way you can either run the stock injectors, or blank them off and run the cbr600 injectors which, from memory is about 200cc flow |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 11 Jun 2008 02:12:47 PM |
cool mate, a pic would be tops i can come get the bits on the weekend if its right
|
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sat 14 Jun 2008 09:58:56 AM |
hey mate, the shell will roll onto a trailer right?
|
96 Super S » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sat 21 Jun 2008 12:50:25 AM |
pm sent..
|
egSi » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sat 21 Jun 2008 09:20:00 AM |
wow!
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Jul 2008 11:13:04 AM |
price drop
motor still for sale send me an offer if your interested, comes with gearbox, as the stator wasnt supplied, will supply one with it too |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 18 Jul 2008 02:06:25 PM |
will try get that motor soon as i can get the ute again, did you end up selling the megasquirt?
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 21 Jul 2008 08:52:18 AM |
no worries smidge, whenever you can get the ute is cool.
the ms stuff has been listed on ebay, need the money at this stage and if i can recover some of its cost, better than letting it sit around. |
96 Super S » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 21 Jul 2008 09:21:18 AM |
Ill take the rear hatch if you still have it. PM sent..
|
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 21 Jul 2008 03:36:35 PM |
i think i've got the hatch now mate, only need one so let me know if you need it
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 23 Jul 2008 01:38:46 PM |
rocker cover sold, nobody in need of motor and gearbox?
found some more parts, pictures and price will be listed later this week. |
Daz » CMF Member Atherton Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 23 Jul 2008 08:05:43 PM |
I dont suppose you have a set of whiteline front and rear sway bars for sale?
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Thu 24 Jul 2008 09:58:16 AM |
sorry mate
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 29 Jul 2008 07:21:01 AM |
taking offers on the motor and gearbox from sportsclassic
|
qwerty132 » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Tue 29 Jul 2008 10:15:55 PM |
Hey,
Few Q about this motor... How many kms? How long has it been sitting? Is it complete? ready for a straight swap over? Have you heard it running? Timing chain noise??? Any leaks? Does it come with ac comp or ps pump? Is the clutch ok? How much to get it to Brisbane? Thanks qwerty132 |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 30 Jul 2008 09:42:00 AM |
hi qerty,
KM's are on the block i think i'll need to check but i know for certain that there are PSI readings from the compression test, was told that it was a low km engine. not sure on how long its been sitting, but it has been with me for a while. i'd say over 6 months, im not sure when it was taken out of the vehicle. from memory it was missing a starter motor, but i have a spare which i will include. you could re-use your old parts if theres anything missing and if its going into another micra. have not heard it running so i couldnt tell you about timing chain noise, i think they told me that they started it up though, but i'll need to check with them. from memory theres no AC comp, i'll need to check PS pump later. havent removed the gbox from the motor, so i wouldnt be able to tell you condition of clutch, would assume that its working. i'll need to get a pallet for shipping, and not really sure on who would freight an item like this but i can find out. whats your post code? hope that helps. cheers |
qwerty132 » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Wed 30 Jul 2008 08:28:44 PM |
Hey,
We have a forklift at work so pallet is fine.. Work postcode is 4113. or 4074 is my brothers place. I have no secure storage at my place. :-( If you have trouble sorting the freight out I let someone local take it.. Ill have to see what my tax return is like before I get too carried away as well.. Thanks qwerty132 |
crumpets » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 01 Aug 2008 11:11:46 AM |
Edit:
Engine/Gearbox seems to be fine so its just everything else :/ disregard this post and sorry for the bother |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Fri 08 Aug 2008 08:09:11 PM |
have a PAINTED pan hard rod - purchased off a micra which was lowered on king springs
also have rear LX side windows lx instrument cluster painted white surrounds hatch the motor and gearbox still available as well, dont have the time at this stage to organise freight to other states, send me a PM with a price you never know you might get lucky... not that lucky though... cheers |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sat 09 Aug 2008 05:55:56 PM |
anyone interested in a air compressor from memory its a 2.5hp, 20m hose, small spray gun selling the lot for $130
compressor purchased 2nd hand still in good condition, the hose is practically brand new, and the small spray gun has not been used |
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Sun 10 Aug 2008 11:35:49 AM |
just had a proper look at the panhard rod, and realised that its just an original one that has been painted another colour. so its not aftermarket like i had thought.
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: project micra for sale in sydney |
Mon 01 Sep 2008 08:36:41 AM |
motor still available
|