Technical Forums» General news and info» Introduction and my micra
33driver » CMF Member Brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Introduction and my micra |
Thu 07 Feb 2008 12:44:02 PM |
Hey everyone,
thought i'd better introduce myself, name is Matt, picked up my Micra K11 last weekend, 96 LX model, metalic blue, and is just a blast to drive as a daily. Its completely stock at the moment besides a dvd player, planning to keep it reasonably stock, thing I'll look at in the future: Power steering conversion Stalk conversion (sooner than later lol) Better air intake maybe exhaust I currently also drive a 96' R33 Skyline which was just getting to expensive to run as a daily. Pictures below :) |
||
Image Attached:![]() |
||
|
33driver » CMF Member Brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 12:44:30 PM |
one more
|
||
Image Attached:![]() |
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 12:51:18 PM |
niec.. colour code therest of the car, and drop it about 2".. i have a 2" mandrel exhuast for sale. $100, cat back. in brisbane thou. where you located? plates look qld..
|
33driver » CMF Member Brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 01:03:31 PM |
i'm out at capalaba, but work at kedron so i'm out and about a lot hehe.
Got pics of the exhaust? wat condition? might be interested. Is it straight bolt up? |
smidge » CMF Member Sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 01:05:44 PM |
looks like mine with different rims and coded bars :D nice
|
lam.666 » CMF Member sydney Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 01:06:31 PM |
welcome, the micras are a very good car as a daily, cheap on fuel and quite zippy around the streets, you will be surprised that they actually handle quite good too
you'll get use to the stalk, as i dont think anyones been able to modify the jap one to work, you might throw the wipers in ur rb once in a while, but its a good laugh and you'll get used to it eventually looks like your in brissy, turbo rolling march on this forum is selling an axle back exhaust i think, check the classifieds thread edit - gosh im blind |
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 01:40:30 PM |
hey mate. no pics of the exhaust.. just basically a 2" mandrel exhaust from cat back... i was gonna sell it with the cat, but i'm gonna keep that now.. you'd need an exhuast shop to weld on a flange to bolt up to you factory cat.. it has a resonator and a 2" sports muffler at the back, with a chrome tip.. its no hks exhaust, but it gives a nice sound that isn't very loud, and will give you some kind of performance gain... for $100 i reckon its a good buy, as the bends alone would probably cost you that. i'm at forest lake.
i also have a whiteline strut brace $100 and a set of kyb excel g shocks |
turbo march-rolling shell » CMF Member brisbane Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Thu 07 Feb 2008 01:41:28 PM |
smidge WROTE: "looks like mine with different rims and coded bars :D nice" coded "bar" |
egSi » CMF Member Australia Member since: ![]() ![]() ![]() ![]() ![]() Posts: ![]() ![]() ![]() ![]() ![]() |
Re: Introduction and my micra |
Fri 08 Feb 2008 09:18:04 AM |
pretty clean micra matt :)
|